TERMS AND CONDITIONS

MINIMUM ORDERS:
Oxylance has a $25 . 00 minimum order .

This is $25 . 00 of product not including freight .

RESTOCKING:
1 . All returns must have “Return Goods Authorization” (RGA) number issued by Oxylance .
2 . All products must be returned freight pre - paid to Oxylance Corporation .
3 . All products are subject to inspection and approval by Oxylance prior to issue of credit .
4 . All products are subject to a minimum 25% re - stocking charge .
5 . After inspection, credit will be issued to customer’s account less re - stocking, repair, and shipping charges .
6 . NO credit will be issued for freight charges incurred by Oxylance .
7 . NO “Return Goods Authorization” will be issued for;

Special order and/or custom items;

Items on invoices over 120 days:

Goods that have been used .

SHIPPING POLICY:

All Oxylance products are sold FOB Birmingham, AL .

PART NUMBERS BREAKDOWN:

In Oxylance part numbers the following formula is used;

BURNING BARS:
First 2 Numbers identifies the outside diameter of the burning bar i . e . 54 ( . 540”) 62 ( . 625”) 67 ( . 675”)
First Letter indicates the Product Line i . e . B = Burning Bar
Next 4 numbers is the length i . e . 0525 = 5’3” and 1050 = 10 . 5’ (10’6”)
Last Letter is the end finish i . e . A = Plain End, C = Quick Connect, D = Threaded on Holder End and
F = Threaded Both Ends and Coupled (NPT pipe threads and a pipe collar) . Threaded end finish is only
available on pipe sizes and can only be supplied in National Pipe Thread (NPT)

HOLDERS:
First 3 positions identifies the holder type i . e . LA1 is for Lever Action number 1
Next 3 or 4 numbers identifies the size burning bar or lance pipe the holder accommodates
Letters after the numbers identifies the options such as B (Ball Valve), F (Flash Back), S (Shield)
The next position will be a dash – and the letter B, C, or D . This letter will identify the CGA oxygen
fitting size . CGA “B”, CGA “C” or CGA “D” as required for various size hoses .

Repair Parts for Holders; many of the repair parts for holders will have a dash and a number at the end
of the part number i . e . LAP1 - 1 refers to an item number in the accompanying photo or drawing . Some of
our repair parts will fit more than one holder and are listed with each holder separately .